Nortel Passport 8672ATME, Инструкция по использованию

Страница: 53 / 162

Chapter 4 Managing the Passport 8672ATME Module with Device Manager 53
Using the Passport 8672ATME Module
Table 5 describes the Interface tab fields.
Table 5 ATM Interface tab fields
Item Description
Index Unique value assigned to each interface. The value ranges
between 16 and 255.
Name Displays the name of this port. To assign or change a name to
the port, highlight the field and enter alphanumeric characters.
Descr Displays the port type of this interface, which may be:
• OC-3c MMF or SMF
• OC-12c MMF or SMF
The card and port numbers are also shown.
Type Displays the media type of this interface, which may be:
• rcOc3cAtmSM
• rcOc3cAtmMM
• rcOc12cAtmSM
• rcOc12cAtmMM
PhysAddress MAC address assigned to a particular interface.
VendorDescr Vendor description.
AdminStatus Sets the port to either of the following states:
• up
• down
When a managed system initializes, all interfaces start with
AdminStatus in the down state. As a result of either
management or configuration action, the AdminStatus is
changed to the up state (or remains in the down state).
OperStatus Displays the current operational state of the interface, either:
• up
• down
If AdminStatus is down, then OperStatus should be down.
If AdminStatus is changed to up, then OperStatus should
change to up if the interface is ready to transmit and receive
network traffic. It should remain in the down state if and only if
there is a fault that prevents it from going to the up state.
LastChange Displays the value of sysUpTime at the time the interface
entered its current operational state. If the current state was
entered prior to the last reinitialization of the local network
management subsystem, the value is zero.
OperSpeed Displays the current operating speed of the ATM port. For
OC-3c, the operating speed is 155.52 Mb/s; for OC-12c, it is
622.08 Mb/s.