Nortel Passport 8672ATME, Инструкция по использованию

Страница: 130 / 162

130 Chapter 6 Configuring the Passport 8672ATME Module
209195-B
Figure 55 IP routing with ATM 1483 PVCs
This configuration requires the following procedures:
• “Creating a VLAN “byPort” and adding ports” on page 121
• “Assigning IP addresses” on page 130
• “Enabling RIP routing” on page 132
• “Configuring a null-encapsulation PVC” on page 136
• “Associating the PVC with the VLAN” on page 136
Creating two VLANs “byPort”
To create two VLANs “byPort,” see “Creating a VLAN “byPort” and adding
ports” on page 121 . One VLAN must have only one ATM port. The second
VLAN can have one or multiple Ethernet ports.
Assigning IP addresses
To assign an IP address to both VLANs:
1 From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed ( Figure 51 on
page 121 ).
Table 42 on page 122 describes the fields in the VLAN Basic tab.
2
Click one of the VLANs.
Note: Each configured ATM 1483 PVC uses one VLAN. The
Passport 8672ATME Module can be configured for a maximum of 256
VLANs per MDA and a maximum of 512 VLANs per card.
9938EB
RFC 1483 Routed PVC
ATM VC1
2.x
ATM VC1
2.x
Traditional
Router
ATM Switches
1.x 3.x
Passport