MSC FRU replacement process 9
Media Services Card replacement
NN40010-315
D. Performing service configuration commands
1
Replace the base function tray into the BCM housing, ensuring that the DS30 MSC cables are not caught
behind the tray.
2
Lock the unit in place.
3
Restore AC power to the main unit only.
4
Connect the computer you are to use to access the system to the serial port on the BCM.
OR
Connect to the BCM through a LAN connection. Then enter the VT100 emulation program (serial port) or
Telnet or SSH (LAN connection):
a
After you connect, press <Enter>
b
When you are prompted for a User ID, enter the administrator user name, and then press <Enter>.
c
When you are prompted for a Domain, enter a domain name if your system uses one, and then press
<Enter>. If your system does not use domains, then only press <Enter>.
d
When you are prompted for a Password, enter the administrator password, and then press <Enter>.
The Main Menu appears
5
Type
7
(Command line), and press <Enter>.
6
After the [<systemname>]C:\TEMP> prompt, type the following, the press <Enter>:
f:
a
After the f: prompt, type the following, and then press <Enter>:
cd f:\program files\nortel networks\voice platform
b
Type the following, and then press <Enter>:
mscoff.bat
A number of ChangeServiceConfig actions occur.
c
When the Voice Platform prompt reappears, type the following, and then press <Enter>:
sc config voicemscservice start= auto
The system indicates that the ChangeServiceConfig succeeded and returns to the Voice Platform prompt.
d
Type
Exit
, and then press <Enter>.
Your system returns to the Main Menu.
Warning:
Do not perform this procedure with the MSC installed.
Note:
This procedure does not apply to BCM 4.0 systems.