18 MSC FRU replacement process
NN40010-315
Media Services Card replacement
•
Backing up BCM settings for BCM 4.0 on page 20
•
Restoring BCM settings for BCM 4.0 on page 25
Starting BRU for BCM 3.x
1
To start the BRU, launch your Web browser.
2
Access the main Web page of the BCM.
3
Click
BRU
.
4
In the
User Name
box, type the administrator user name.
5
In the
Password
box, type the administrator password.
6
Click
OK
.
The BRU dialog appears.
Backing up BCM settings for BCM 3.x
A backup saves your BCM settings to a volume on the BCM or another computer on the network.
1
Start BRU.
The BRU dialog appears with the BACKUP operation selected.
2
Click
Volume
.
The Volume Administration dialog appears.
3
Under Backup Location, if you need to change the location to store the backup, click
VOLUME
, and select the
correct location.
4
Click
Select
to return to the BRU main page.
5
From the Select BCM Components list, select
Telephony
.
6
Click
Start Backup
.
The User name and Password dialog appears.
7
In the
Username
box, type the user name required to access the remote volume.
Use a domain name qualifier if you are require to.
8
In the
Password
box, type the password required to access the remote volume.
9
Click
Submit
.
The Report File Name dialog.
Note:
You must use Microsoft Internet Explorer 5.01 or later to use the
Backup and Restore Utility.
Caution:
A backup can interrupt services that run on the BCM. A warning
appears whenever the backup causes a service interruption. If you want to perform
a backup that does not affect the system, you can exclude services that can be
affected. Alternatively, you can include these services and perform a backup at a
time when the system is typically not in use.
Note:
If you back up the file to a Local volume, the User Name and
Password dialog does not appear. Go to