Nortel Meridian 1 Option 11C Compact Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 148

Nortel Meridian 1 Option 11C Compact Скачать руководство пользователя страница 101

Page 90 of 136

Chapter 8 — M2250 Attendant Console

553-3121-100

Standard 2.0

September 1998

Busy Lamp Field/Console Graphics Module Busy Lamp
Field/Console Graphics Module

The Busy Lamp Field/Console Graphics Module (BLF/CGM) can be added
to an M2250 attendant console.

The BLF/CGM can:

•

display the status (busy or idle) of up to 150 consecutive extensions
within the system (SBLF)

•

display the status of any hundreds group of DNs within the system
(EBLF)

•

display which attendant console is the supervisory console, and which
consoles are active

•

display supplementary information about individual extensions, such as
the reason the person is away (business, vacation, or illness), when the
person is due to return, and an alternate extension where calls to the
person should be directed

•

display a company logo

•

display graphics

•

display text in any one of eight languages

•

have its screen contrast adjusted for easy viewing

Installation

The BLF/CGM mounts on the back of the attendant console and is held
on using snapfits and two screws. It is connected to the console using a
15-way connector that is located on the keyboard printed circuit board (PCB).
This connector is accessed through a rectangular knockout section located
underneath the casing overhang at the Meridian logo location (see

For more information on the features and operation of the BLF/CGM, refer
to the Busy Lamp Field/Console Graphics Module User Guide (P0706875).

«
...
99
100
101
102
103
...
»

Содержание Meridian 1 Option 11C Compact





















































































































































Отзывы:

Нет отзывов