
v
Nortel IVR 2.5/S Aculab-Based E1 CAS/ISDN PRI Signaling Guide
Contents
E1 Signaling Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Installing the Aculab E1/PRI signaling option
Installing the Aculab E1/PRI signaling option hardware. . . . . . . . . . . 4-2
Installing the Aculab-based E1/PRI signaling option software . . . . . . 4-4
Configuring E1 CAS country parameters . . . . . . . . . . . . . . . . . . . . . . 4-8
Configuring ISDN PRI country parameters . . . . . . . . . . . . . . . . . . . 4-12
Activating the signaling option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Appendix A: Accessing the Service Console
Interface A-1
Using a terminal to access the SCI . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Using a modem to access the SCI . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Using the LAN to access the SCI . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
Accessing the SCI on an MRS/AP . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Appendix B: Card configurations
Aculab ACL-30 E1 Interface (75
Ω
) . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Aculab ACL-60 E1 Interface (75
Ω
) . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
S1 I/O addressing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3