Installing the Aculab E1/PRI signaling option 4-5
Nortel IVR 2.5/S Aculab-Based E1 CAS/ISDN PRI Signaling Guide
A prompt then appears asking if you want to continue.
Are you sure you wish to continue?
Current continue = no
yes - Continue with operation.
no - Return to the previous menu.
Continue? =
3
Enter
y
and press
<Enter>
to continue with the installation.
The following messages are displayed:
Stopping the System Now!
.
.
(various messages)
.
/sci/install>
4
Wait until the Ready light on the front panel of the MRS begins flashing
before continuing. This step ensures that all MRS processes were
stopped. On the MRS/AP, there is no Ready light to observe (just
proceed to the next step).
5
At the
/sci/install>
prompt, type
package
and press
<Enter>
.
The following prompt is displayed:
Insert the floppy - type q to quit or hit ENTER to
continue:
ATTENTION
The installation script suspends all MRS processes and then displays
the
/sci/install>
prompt.