Nortel Express Call Center, Руководство по установке

Страница: 24 / 48

24 Symposium Express Call Center
Media Card Standard 2.0
5 To specify a subnet mask, at the command prompt, type
lnIsa_writeSubnetMask “ <aaa.bbb.ccc.ddd> ” , and then press Enter.
Note: Do not include the < and > symbols as part of the input. The
quotation marks are required.
6 To specify a default gateway (optional), at the > prompt, type
lnIsa_writeGW “ <aaa.bbb.ccc.ddd> ” , and then press Enter.
Note: Do not include the < and > symbols as part of the input. The
quotation marks are required.
7 To turn off maintenance mode, at the command prompt, type
maintModeOff .
8 To make the changes take effect, at the command prompt, type
sysReboot , or press Reset on the faceplate.
Note: If the IP address is not unique, the following message appears on the
terminal attached to the faceplate connector:
0x12c3f84 (tNetTask)
duplicate IP address ' <hex value> ' sent from Ethernet
address <address>
. If this message appears, you must assign another
address.
9 You know that the card has completed restarting when the following
message appears:
Waiting for DSPM to initialize
.
10 Press Enter to get the logon prompt.
11 Choose Call ➝ Disconnect to end the HyperTerminal session.
Note: The network details and RAM appear in the system restart
information. To see an example of a system restart, refer to Appendix A,
“System restart example.”
To check the IP address
1 Log on as user vpsdseuser with password welcome2vp .
2 Type hostShow , and then press Enter.
Result: The card’s IP address appears.
Although the Media Card is located on the ELAN network, it is possible to
administer files and directories from a client CLAN connection through the
Symposium Express Call Center client application. This facility is part of the
Voice Services or Media Card client application. When a voice services