![background image](http://html.mh-extra.com/html/nortel/express-call-center/express-call-center_installation-manual_1707206016.webp)
16
Symposium Express Call Center
Media Card
Standard 2.0
Installing the Media Card
To install the Media Card
1
Determine the cabinet, shelf, and slot location where the Media Card is to
be installed.
2
Unpack and inspect the circuit card. Handle the circuit card using the
guidelines in “Precautions for handling circuit cards” on page 39.
3
Install a 48/64 Mbyte Type II PC Storage Card in the slot labeled A: on the
Media Card. This card is necessary for prompt storage.
4
Insert a dongle into the socket on the Media Card if it is not already present.
5
Insert the Media Card into its assigned IPE slot, but do not fully seat the
card.
6
Connect Media Card cables. See “Cabling the Media Card” on page 18.
Note:
Do not cable the card for Ethernet until after the IP address has been
configured. See “Assigning network information” on page 22.
7
Fully insert the Media Card in its assigned slot and lock latches.
Note:
The red LED on the faceplate of the Media Card remains lit until a
unit has been configured and matched with a DSP port.
8
Configure an Internet Protocol (IP) address for the Media Card.
See “Assigning network information” on page 22.
9
Configure Voice Services ports. See “To configure voice services ports” on
page 31.
The Symposium Express Voice Services on Media Card installation is
complete.
Содержание Express Call Center
