Nortel business policy switch 2000, Руководство пользователя

Страница: 211 / 412

Chapter 3 Using the console interface 211
Using the Business Policy Switch 2000 Version 2.0
Table 29 describes the Port Configuration screen fields.
Note: When a gigabit MDA is installed, only the Status field for that
MDA port is configurable. See “High Speed Flow Control Configuration
screen ” on page 212 to set the autonegotiation field for the gigabit MDA
port.
Table 29 Port Configuration screen fields
Field Description
Port Indicates the switch port numbers that correspond to the field values in that row of
the screen (for example, the field values in row 2 apply to switch port 2). The values
that you set in the
Switch row will affect all switch ports and, when the switch is part
of a stack, the values that you set in the Stack row will affect all ports in the entire
stack (except the Gigabit MDA ports or fiber optic ports, when installed).
Trunk The read-only data displayed in this column indicates the trunks that correspond to
the switch ports specified in the Trunk Members fields of the Trunk Configuration
screen (see “
MultiLink Trunk Configuration Menu screen ” on page 215 ).
Status Allows you to disable any of the switch ports. You can also use this field to control
access to any switch port.
Default Value Enabled
Range Enabled, Disabled
Link A read-only field that indicates the current link state of the corresponding port, as
follows:
• Up: The port is connected and operational.
• Down: The port is not connected or is not operational.
LnkTrap Allows you to control whether link up/link down traps are sent to the configured trap
sink from the switch.
Default Value On
Range On, Off
Autonegotiation When enabled, sets the corresponding port speed to match the best service provided
by the connected station, up to 100 Mb/s in full-duplex mode.
NOTE: This field is disabled for all fiber optic ports. Autonegotiation cannot be
disabled with the ports on the BPS2000-1GT and BPS2000-2GT MDAs. Use the
High Speed Flow Control Configuration screen (next) to set autonegotiation for all
gigabit ports.
Default Value Enabled
Range Enabled, Disabled