manualshive.com logo in svg

Nortel business policy switch 2000, Руководство пользователя

Пользовательский мануал для переключателя бизнес-политики Nortel 2000 доступен для бесплатного скачивания с manualshive.com. Получите подробную информацию о продукте и его использовании, изучив руководство. Гарантировано легкое и понятное руководство для настройки вашего бизнес-политики.

Поделиться
Скачать
background image

2

208700-C

 

Copyright © 2001 Nortel Networks

All rights reserved. Printed in the USA. November 2001.

The information in this document is subject to change without notice. The statements, configurations, technical 
data, and recommendations in this document are believed to be accurate and reliable, but are presented without 
express or implied warranty. Users must take full responsibility for their applications of any products specified in 
this document. The information in this document is proprietary to Nortel Networks NA Inc. 

Trademarks

Nortel Networks is a trademark of Nortel Networks.

Accelar, Autotopology, BaySecure, BayStack, Business Policy Switch 2000, Nortel Networks, the Nortel Networks 
logo, Optivity, Optivity Policy Services, Passport, Preside, and StackProbe are trademarks of Nortel Networks.

Microsoft, Windows, Windows NT, and XP are registered trademarks of Microsoft Corporation.

Acrobat Reader and Adobe are registered trademarks of Adobe Systems Incorporated.

Java is a registered trademark of Sun Microsystems, Inc.

All other trademarks and registered trademarks are the property of their respective owners.

Restricted rights legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph 
(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.

Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer software, 
the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in the 
Commercial Computer Software-Restricted Rights clause at FAR 52.227-19.

Statement of conditions

In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the 
right to make changes to the products described in this document without notice.

Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or 
circuit layout(s) described herein.

Portions of the code in this software product may be Copyright © 1988, Regents of the University of California. All 
rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above 
copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, 
and other materials related to such distribution and use acknowledge that such portions of the software were developed 
by the University of California, Berkeley. The name of the University may not be used to endorse or promote products 
derived from such portions of the software without specific prior written permission.

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE.

In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains 
restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third 
parties).

Содержание business policy switch 2000





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для business policy switch 2000

LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Бренд: LaCie Страницы: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Бренд: LaCie Страницы: 2
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Бренд: LaCie Страницы: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Бренд: LaCie Страницы: 14
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Бренд: LaCie Страницы: 9
Parkside POF 1200 A1 Operation Manual preview
POF 1200 A1
Бренд: Parkside Страницы: 55
Parkside POF 1200 A1 Operation And Safety Notes preview
POF 1200 A1
Бренд: Parkside Страницы: 34
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Бренд: Yamaha Страницы: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Бренд: Yamaha Страницы: 5
Lindy 25046 User Manual preview
25046
Бренд: Lindy Страницы: 4
AlphaShield INTERNET PRIVACY PROTECTION (Spanish) Manual Del Usuario preview
INTERNET PRIVACY PROTECTION
Бренд: AlphaShield Страницы: 49
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Бренд: Garderos Страницы: 23
impinj Speedway Revolution Installation And Operation Manual preview
Speedway Revolution
Бренд: impinj Страницы: 60
Xantech CC12 Installation Instructions preview
CC12
Бренд: Xantech Страницы: 4
Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual preview
E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010
Бренд: Juniper Страницы: 122
Lanner FW-7551 User Manual preview
FW-7551
Бренд: Lanner Страницы: 38
Allied Telesis AT-BSTACK1 Quick Install Manual preview
AT-BSTACK1
Бренд: Allied Telesis Страницы: 34
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Бренд: KYLAND Technology Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды