36
Ethernet Routing Switch 8310 and 8306 chassis installation
Prerequisites
•
Provide adequate space around the unit for access to cable
connectors.
•
Ensure that the surface can safely support the weight of the chassis,
its components, and its attached cables. See
“Chassis installation time
requirements” (page 35)
.
Procedure steps
Step
Action
1
Set the switch on the flat surface and check for proper
ventilation.
Allow at least 2 inches 5.1 cm) on each side for proper
ventilation and 5 inches (12.7 cm) at the front for power cord
clearance.
2
Attach rubber feet to each marked location on the bottom of the
chassis.
The rubber feet are optional but recommended to keep the unit
from slipping.
3
Attach all devices to the ports.
--End--
Procedure job aid: Chassis weight including components
The following table shows the weight of each chassis including the
components.
Chassis
Maximum weight (chassis and components)
8310
225 pounds (lb) (102 kilograms [kg])
8306
140 lb (63 kg)
Mounting the Ethernet Routing Switch 8310 and 8306 chassis in
an equipment rack
Install the Ethernet Routing Switch 8310 and 8306 chassis in a standard
19-inch equipment rack to provide a convenient location for the safe
operation of the switch.
ATTENTION
If you are mounting the chassis in a 23-inch equipment rack, see the rack
manufacturer’s 23-inch-to-19-inch rack adapter installation instructions.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309
01.01
Standard
16 June 2008
Copyright © 2008 Nortel Networks
.
Содержание 8300 Series
Страница 67: ......