Nortel 8300 Series, Руководство по установке

Страница: 48 / 68

48 Switch operations
Protecting memory card files
Write-protect the memory card for backup purposes after you successfully
load the configuration file and save your configuration because Nortel
ships each memory card with the read-write protect switch in the
unprotected position.
Typically, you do not operate the switch with a write-protected memory
card. Make a copy of your configuration on another memory card,
write-protect that card, and store it in a safe place. If you do not have a
second memory card, you can copy your configuration to a File Transfer
Protocol (FTP) or Trivial FTP (TFTP) server.
Prerequisites
•
Remove the card from the Ethernet Routing Switch 8393SF/CPU or
8394SF/CPU module before changing the read-write protection.
ATTENTION
You must remove the card from the Ethernet Routing Switch 8393SF/CPU
or 8394SF/CPU module before changing the read-write protection. Failure to
remove the card can result in improper write protection.
Procedure steps
Step Action
1 Remove the memory card from the Ethernet Routing Switch
8393SF/CPU or 8394SF/CPU module.
2 Locate the read-write protect switch on the edge opposite the
arrow on the memory card.
3 Adjust the read-write protect switch.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.