Nortel 5500 series, Руководство по установке

Страница: 44 / 70

44 Installing the Nortel Ethernet Routing Switch
• For a stack configuration, enter a value in the In-Band Stack IP
Address field in dotted-decimal notation.
IP Configuration/Setup screen
IP Configuration/Setup
BootP Request Mode: [ BootP When Needed ]
Configurable In Use Last BootP
------------------- --------------- ---------------
In-Band Stack IP Address: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
In-Band Switch IP Address: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
In-Band Subnet Mask: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
Default Gateway: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
IP Address to Ping: [ 0.0.0.0 ]
Start Ping: [ No ]
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu. Press Ctrl-C
to return to Main Menu.
Note: The In-Band Switch IP Address field allows a switch to
operate as a standalone switch. This field is not required for
the operation of a stacked switch. The same value cannot be
entered in both the In-Band Switch IP Address field and the
In-Band Stack IP Address field.
7 In the In-Band Subnet Mask field enter the appropriate subnet
mask in dotted-decimal notation.
Note: If the In-Band Subnet Mask field does not already
contain a value when specifying an IP address for the switch, the
switch software provides an in-use, default value for the subnet
mask field. This value is based on the class of the IP address
entered in the previous step.
8 In the Default Gateway field, enter the appropriate default gateway in
dotted-decimal notation.
Note: If Nortel Ethernet Routing Switch 5500 Series switches
are being stacked, ensure that one switch is set as the Base Unit.
For more information on this topic, refer to system configuration
guide noted in
"Related publications" (page 12) on page 16.
9 Press CTRL + C to return to the main menu.
Nortel Ethernet Routing Switch 5500 Series
Installation
NN47200-300 2.00 Standard
5.0 7 July 2006
Copyright © 2005 - 2006, Nortel Networks Nortel Networks Confidential
.