Nortel 2500 Seriess, Руководство по настройке системы

Страница: 98 / 392

98 CLI Basics
Managing MAC address forwarding database table
This section describes the commands to view the contents of the MAC
address forwarding database table, as well as setting the age-out time for
the addresses. The following topics are covered:
• "show mac-address-table command" (page 98)
• "mac-address-table aging-time command" (page 99)
• "default mac-address-table aging-time command" (page 99)
show mac-address-table command
The
show mac-address-table
command displays the current contents
of the MAC address forwarding database table. The syntax for the
show
mac-address-table
command is:
show mac-address-table [vid <1-4094>] [aging-time] [port
<LINE>][address <H.H.H> {include | exclude <pattern>}]
The
show mac-address-table
command is executed in the Privileged
EXEC command mode.
Table 15 "show mac-address-table command parameters and variables"
(page 98)
describes the parameters and variables for the show
mac-address-table command.
Table 15
show mac-address-table command parameters and variables
Parameters
and variables
Description
vid <1-4094> Enter the number of the VLAN you want to display the
forwarding database.
Default is to display the management VLAN’s database.
aging-time Displays the time in seconds after which an unused
entry is removed from the forwarding database.
port <LINE> List of ports.
address <H.H.H> Displays a specific MAC address if it exists in the
database. Enter the MAC address you want displayed.
include | exclude
<pattern>
Lets you filter the results of the command by printing
only those entries in the address table that include or
exclude a given pattern. The value for
<pattern>
must be a sequence of 1 to 6 bytes in hex, separated
by dashes.
for example:
show mac-address-table port
1/1-5 address include 00-0E-45-23
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.