Nortel 2500 Seriess, Руководство по настройке системы

Страница: 214 / 392

214 System configuration using the CLI
The
clock summer-time
command is executed in the Global
Configuration command mode.
Table 75 "clock summer-time command parameters and variables" (page
214)
describes the parameters and variables for the
clock summer-time
command.
Table 75
clock summer-time command parameters and variables
Parameters and
variables
Description
zone
The acronym to display when summer time is in effect. If
unspecified default to the time zone acronym. (Range: up
to 4 characters)
date {<day>
<month> <year>
<hh:mm>} {<day>
<month> <year>
<hh:mm>}
The first date specifies when summer time should start
and the second date specifies when summer time
should end.
• day: day of the month (Range: 1 to 31)
• month: month (Range: first three letters by name)
• hh:mm: time in military format, in hours and minutes
ATTENTION
<day> <month> parameters can also be entered in
order: <month> <day>.
offset Number of minutes to add during summer time (Range:
-840 to 840).
no clock summer-time
The
no clock summer-time
command disables the daylight savings
time feature. The syntax for the
no clock summer-time
command is:
no clock summer-time
The
no clock summer-time
command is executed in the Global
Configuration command mode.
The
no clock time-zone
command has no parameters or variables.
show clock time-zone
The
show clock time-zone
command displays the local time zone
settings. The syntax for the
show clock time-zone
command is:
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.