manualshive.com logo in svg

Nortel 222, Руководство пользователя, Страница: 344 / 349

Поделиться
Скачать
Nortel 222 Скачать руководство пользователя страница 344

344

Appendix M SIP

NN47922-501

If the primary WAN connection fails, the SIP client needs to re-register with the 
SIP server through the secondary WAN port to have the SIP connection go 
through the secondary WAN port. 

When the Business Secure Router uses both of the WAN ports at the same time, 
you can configure a routing policy to have the voice traffic from any IP address 
with UDP port 5060 and the RTP ports go over a specified WAN port. 

Enabling or disabling the SIP ALG

The Business Secure Router SIP ALG is turned off by default to avoid 
retranslating the IP address of an existing SIP device that is using STUN. If you 
want to use a SIP client device (a SIP phone or IP phone for example) behind the 
Business Secure Router without STUN, use the 

ip alg enable ALG_SIP

 

command to activate the SIP ALG.

Signaling session timeout

Most SIP clients have an expire mechanism indicating the lifetime of signaling 
sessions. The SIP UA sends registration packets to the SIP server periodically and 
keeps the session alive in the Business Secure Router. 

If the SIP client does not have this mechanism and makes no call during the 
Business Secure Router SIP timeout default (60 minutes), the Business Secure 
Router SIP ALG drops any incoming calls after the timeout period. You can use 
the 

ip alg siptimeout 

command to change the timeout value.

Audio session timeout

If no voice packets go through the SIP ALG before the timeout period default (5 
minutes) expires, the SIP ALG does not drop the call but blocks all voice traffic 
and deletes the audio session. You cannot hear anything and you must make a new 
call to continue your conversation.

Содержание 222






























































































































































































































































































































































Отзывы:

Нет отзывов