Nortel 222, Руководство пользователя, Страница: 119 / 349

Chapter 9 Network Address Translation (NAT) 119
Nortel Business Secure Router 222 Configuration — Advanced
Figure 46 15.2.1: NAT Server Configuration
15.2.1 - NAT Server Configuration
Index= 1
-----------------------------------------------------------------
Name=
Active= No
Start port= 0 End port= 0
IP Address= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
4
Enter a port number in the Start Port field. To forward only one port, enter it
again in the End Port field. To specify a range of ports, enter the last port to
be forwarded in the End Port field.
Table 31 15.2.1: NAT Server Configuration
Field Description
Index This is the index number of an individual port forwarding server entry.
Name Enter a name to identify this port-forwarding rule.
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable the NAT
server entry.
Start Port Enter a port number in the Start Port field. To forward only one port,
enter it again in the End Port field. To specify a range of ports, enter the
last port to be forwarded in the End Port field.
End Port
IP Address Enter the inside IP address of the server.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to
Confirm…” to save your configuration, or press [ESC] at any time to cancel.