Nortel 1750, Инструкция по установке, Страница: 64 / 108

64
Chapter 3 Installing option cards and DIMMs
NN46110-316 02.01
5 If you are replacing a DIMM, remove the installed DIMM as follows:
a Press down the locking lever on either side of the DIMM (Figure 26) .
b Pull the DIMM up to remove it from the slot.
6
Press down the locking lever on either side of the slot where you plan to
install the new DIMM
(Figure 26) .
7
Place the new or replacement DIMM in the slot (Figure 26) .
Use the alignment keys to properly position the DIMM in the slot.
8 Press the DIMM firmly into the socket.
9 Pull up the locking lever on either side of the DIMM to snap it into position.
Figure 26
Installing and removing a DIMM
To remove DIMMs, p u ll back
locking levers and p u ll o u t DIMM.
To install DIMMs, p u ll back locking
levers and p u sh in DIMM.
Locking lever
Alignment keys
CS260019A