Nortel 1750, Инструкция по установке, Страница: 45 / 108

Chapter 2 Installing the Nortel VPN Router 1750 chassis
45
Nortel VPN Router Installation — VPN Router 1750
Installing the chassis
To install the VPN Router 1750, do one of the following:
• Position the chassis on a flat, sturdy, horizontal surface.
• Mount the chassis in a standard equipment rack (see “Installing the chassis in
an equipment rack” on page 46 ).
Installing the chassis on a flat surface
If you decide to place the VPN Router 1750 on a flat surface, make sure that the
surface is large enough for the gateway and sturdy enough to support the
combined weight of the VPN Router 1750 and the cables that you attach to it.
The VPN Router 1750 accessory kit includes four rubber feet that can be attached
to the bottom of the gateway.
Figure 15 shows the placement of these rubber feet.
Figure 15
Placement of rubber feet on the bottom of the chassis
CS160016A
Attach feet (4)