8
Resetting or Excluding the Garage Door Controller
If you have trouble adding the Garage Door Controller you can reset the device. Resetting the device
removes it from a site (Not the same as factory resetting the device). You can then try to add the
device again.
To reset a Garage Door Controller:
1.
In the web portal, click the
System
tab.
2.
Click
Manage Devices
.
♦
The Manage Devices window opens..
3.
Click
Switches/Doors/Thermostats /Others.
♦
The Z-Wave Devices screen is displayed..
4.
At the bottom of the screen, click
Reset
.
5.
Press and release the Garage Door Controller’s include button for (1) one second .
♦
The Z-Wave device resets and a two second long audible beep can be heard.
♦
Click
Go Back
,
and then
Close
to exit Manage Devices.
6.
Click
Close
again to confirm.
To remove a Garage Door Controller
:
1.
In the web portal, click the
System
tab.
2.
Click
Manage Devices.
♦
The Manage Devices window opens.
3.
Click
Switches/Doors/Thermostats/Others.
♦
The Z-Wave Devices screen is displayed.
4.
Click the name of the device you want to delete.
♦
The Z-Wave device Details screen displays information about the selected device.
5.
Click
Remove
at the bottom left of the screen.
♦
A pop-up window prompts you to confirm.
6.
Click
Remove
to complete the deletion.
✓
NOTE:
If you attempt to delete a device that is referenced in an automation, alert, or schedule, or
replace the device in all automations, alerts, and schedules in which it is referenced before you can
delete the device . Click
OK
to exit without deleting the device .
Enrolling with the System (Cont.)
