Nortek Security & Control Mighty Mule HD272 Скачать руководство пользователя

Страница: 12 / 44

HD272 Installation Instructions

Warning Sign

Pedestrian Gate

Pedestrian Gate Lock

(recommended, not included

)

Vehicular Gate

7 foot

minimum

Important Safety Information

Warning signs alert people of automatic gate operation and are required when installing Mighty Mule Automatic

Gate Operators. A minimum of two WARNING SIGNS must be installed in the area of the gate. Each sign is to be

visible by persons located on the side of the gate on which the placard is installed.

The operator is intended for installation only on gates used for vehicles. Pedestrians must be supplied with a

separate access opening. The pedestrian access opening shall be designed to promote pedestrian usage. Locate

the gate such that persons will not come in contact with the vehicular gate during the entire path of travel of the

vehicular gate.

We recommend using the Nortek Security & Control Pedestrian Gate Lock (Call the Nortek Security & Control

Sales Department at 800-543-4283) for controlled access.

Installing Warning Signs and Pedestrian Gates

Warning Signs

The gate operator is provided with 2 safety warning signs.

The signs

MUST

be installed on the front and back of the

gate where they will be visible in the area of the gate.
Permanently secure each warning sign to the gate.
Immediately replace a damaged or missing warning sign.

Содержание Mighty Mule HD272













































Результаты поиска

Содержание Mighty Mule HD272

Отзывы:

Похожие инструкции для Mighty Mule HD272

Бренды по названию

Популярные бренды

Nortek Security & Control Mighty Mule HD272, Руководство по установке

Результаты поиска

Содержание Mighty Mule HD272

Отзывы:

Похожие инструкции для Mighty Mule HD272

Бренды по названию

Популярные бренды