Nortec MH Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 60

Nortec MH Series Скачать руководство пользователя страница 8

10-00

Page 4
2008-12-03

2. FOR YOUR SAFETY

2.1 SAFETY OVERVIEW

General

Every person working with the Nortec MH must have read and understood the
installation and operating instructions before carrying out any work. Knowing and
understanding the contents of the installation and operating instructions is a basic
requirement for protecting all personnel against any kind of danger, to prevent faulty
operation, and to operate the unit safely and correctly.

All signs and markings applied to the unit must be observed and kept in a readable
state.

Qualification of personnel

All work (installation, operating, servicing, etc.) described in these installation and
operating instructions

may only be carried out by a specialist who is well trained

and adequately qualified and is authorized by the customer

.

For safety and warranty reasons any action beyond the scope of this manual must be
carried out only by qualified personnel authorized by the manufacturer.
It is assumed that all persons working with the Nortec MH are familiar and comply with
the appropriate regulations on work safety and the prevention of accidents.

Intended use

The Nortec MH Adiabatic Air Humidifier/cooler is intended exclusively for

air

humidification/air cooling in air ducts or air handler

within the specified operating

conditions. Any other type of application, without the written consent of your Nortec
Representative, is considered as not conforming with the intended purpose and may
lead to the Nortec MH becoming dangerous.

Operation of the equipment in the intended manner requires

that all the information

in these instructions are observed (in particular the safety instructions)

.

«
...
6
7
8
9
10
...
»

Содержание MH Series





























































Отзывы:

Нет отзывов