NORTAC DEFENCE WAVE, Руководство пользователя

Страница: 9 / 26

9
2 WAVE OPERATION
2.1 POWERING ON/OFF DEVICE
POWERING ON
The Wave can be turned ON by pressing the power button at the bottom left of the unit.
After being powered up, the Wave immediately turns the GPS receiver ON to retrieve the
current date and time, displayed in UTC.
(Other time zones will be introduced in a future
firmware)
Once the Wave has a clear view of the sky it will display the GPS and Iridium signal
quality along with the current position in the form of LAT/LONG and MGRS coordinates.
POWERING OFF
The Wave can be turned OFF by holding down the power button for approximately 5
seconds.
2.2 HOME SCREEN
2.2.1 HOME SCREEN ICONS
Below is an explanation of Home Screen Icons:
The Iridium signal strength is represented by the number of vertical bars. Signal
strength can range from the lowest of zero to the highest of four bars. Device needs
signal strength
(2 bars) to have the ability to transmit data.
The GPS signal is represented by a white arrow located beside the Iridium strength
signal. A white arrow means GPS is acquired.
IMPORTANT: During transmission, the Wave GPS and Iridium antenna must have a clear view of the
sky. Although both GPS and Iridium receivers are quite sensitive and can often obtain a location fix
when the antenna are partially blocked (near buildings, on a vehicle dashboard), it is recommended
that the antenna have a clear view of the sky to minimize acquisition time and better position
accuracy.
Battery strength is represented by the battery symbol on the top right of the home
screen. A lightning bolt symbol is shown when the Wave is charging via external
power source.
A lock symbol located on the top left tile indicates Wave has encryption keys loaded
and is encrypted.