NORTAC DEFENCE WAVE, Руководство пользователя

Страница: 8 / 26

8
1.5.2 BATTERY REPLACEMENT/REMOVAL
The Wave has the ability to use field replaceable batteries. Please follow the steps below
to replace the batteries:
1. Ensure Wave is not connected to any cables, not charging, and is OFF
2. Unscrew the bottom battery cover
3. When inserting the battery be sure that the charging connectors on the
battery and inside the device line up. If not, the battery will not fully insert as
shown below.
Re-inserted battery should Re-inserted battery
not hang out as pictured. should fit flush as
pictured.
Loosen the screws on battery cover
and remove cover as pictured.
1.5.3 BLOCK CHARGER STATION
• The block charger station is powered by a 5V
20W AC/DC adapter. It can house 5 Wave
batteries at a time. Charge time from empty is
~5 hours
• It is also equipped with a USB-A port that can be
used to charge a WAVE or another USB
compatible peripheral at the same time.
• LED indicators show the state of battery charge.
RED indicates battery is charging. GREEN
indicates battery is fully charged.
*Note – If battery dies, all settings will remain the same on the Wave
Battery Slot Cover
Battery