NORTAC DEFENCE WAVE, Руководство пользователя

Страница: 15 / 26

15
The Wave is able to receive messages, settings changes and polls while in low
power, however, it will only be received if upon wake up, the Wave acquired a
GPS and Iridium signal.
Vehicle Low Power: ON
When in vehicle tracking mode, low power set to “ON” and while plugged in to a
12V adapter via USB-C cable, the Wave will enter low power mode after 5 min
when the vehicle is shut off. It will use the current LPM setting.
Once vehicle is turned back on, the Wave will return to vehicle tracking mode and
use its current tracking setting.
2.3.2 DEVICE SETTINGS
In Device Settings, users have the ability to customize functionalities of the
Wave. They include;
Antenna Mode: Internal – Built in GPS and Iridium antenna.
External – External antenna through SMA connection on the
back of the device.
Sounds: Triggers – Message Received – 3 short beeps
Sent Message Failed – 1 short beep
Vibration: Triggers – Message Received – 3 short
vibrations
Sent Message Failed – 1 short
vibration
LED: Triggers – Message Received – 3 flashes
(3 consecutive flashes every 30 seconds
until opened)
24 Hour Time: Changes clock from 12 to 24 hours
Distance Reporting: Enabled, this feature allows the user to be tracked based
on set distance intervals rather than a time interval. This option will appear in
each of the tracking modes and give the user the ability to change the distance
intervals at which the Wave reports at.
If the Wave stops moving, it will begin to report at the set time interval.