Norstar Compact ICS 6.0, Руководство пользователя

Страница: 149 / 252

P0992670 03 Compact ICS 6.0 System Coordinator Guide
User Preferences
The User Preferences section of programming allows you to program
memory buttons, speed dial codes and other settings for any Norstar
telephone on the system.
For example, an employee may want to have the Do Not Disturb feature
programmed onto a memory button or create a speed dial code. Instead of
programming from the employee’s telephone, you can go into
programming on the telephone nearest you to make the change.
Using User Preferences
1. Press
²¥¥èêäå
(
²¥¥¡àÜà
).
2. Enter your System Coordinator or Basic password (the default
passwords are
ÛÜßÝß
and
ÛÛàÝÛ
).
By using a Basic password, it is possible to have someone else do day-to-
day upkeep of people’s telephones without giving out access to sensitive
programming. See ‘‘Using passwords’’ on page 202.
After you enter the proper password, the display shows you the telephone
with the lowest internal number followed by its name (For example,
21:RECEPTN ).
1. Press
‘
to move through all the telephones on the system.
2. Press
≠
when you see the telephone you want to change. The
display shows the model number of the telephone at the extension.
The display shows
Connect set
if no telephone is connected at that
internal number.
You cannot make changes if the model is
Other
.
3. Press
‘
to move through all the subheadings in User
Preferences.
User Preferences programming is available under the heading
User
Preferences
in
Terminals&Sets
in the main body of programming.