Norstar Compact ICS 6.0, Руководство пользователя

Страница: 210 / 252

210
/ Using System features
Compact ICS 6.0 System Coordinator Guide P0992670 03
5. Press
≠
.
6. Press
‘
until the display shows
Aux. ringer
.
7. Use
CHANGE
to select
Y
(Yes) or
N
(No).
Your installer or customer service representative can program the auxiliary
ringer to start ringing for incoming lines as part of Ringing Service.
Using Host System dialing signals
You can access host systems, such as private branch exchanges (PBX)
from Norstar by using host system signaling features (also known as
end-to-end signaling). These features either send a special signal to the host
system or allow you to program delays required by host systems in external
autodial or speed dial sequences.
Link
²àÚ
If your Norstar system is connected to a private branch exchange (PBX),
you can use a Link signal to access special features. On some telephones,
Link is called FLASH.
The Link signal can be included as part of a longer stored sequence on an
external autodial button or in a speed dial code. The Link symbol (
¤
) uses
two of the 24 spaces in a dialing sequence.
Preventing a telephone from using Link
Link can be restricted at individual telephones.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 13 for more information.
1. Press
²¥¥ÛßßÜÝÝ
.
2. Press
ÛÜßÝß
(the default System Coordinator password).
3. Press
≠
and enter the internal number of the telephone you
want to program.