NORIS Automation GmbH
General information on this instruction manual | 2
Instruction manual FA13
9 / 44
Type code FAH13[..]
Measuring
principle
H
Difference-Hall
Measuring prin-
ciple supplement
Without code: 1 output signal
Z
2 output signal, galvanically connected
S
2 output signals, galvanically connected with
status output (e. g. rotation direction detection)
D
2 output signals, galvanically isolated
Q
4 output signals (2 + 2 inverted)
Construction
type & material
13
- Sensor tube: Stainless steel
Nominal length
02
L1 = 60 mm, L2 = 5 mm
03
L1 = 80 mm, L2 = 5 mm
04
L1 = 100 mm, L2 = 20 mm
05
L1 = 120 mm, L2 = 40 mm
Other lengths up to 200 mm available on request
Thread type
13
- M14 x 1 (FAH13 only)
22
- M16 x 1.5 (FAH13 only)
15
- M18 x 1
23
- M18 x 1.5
88
- 5/8‘‘ – 18 UNF (FAH13 only)
Electrical
connection
A
-
DIN43650-A pin connector (FAH13 only)
C
-
MIL 14-5PN VG95234 pin connector (FAH13
only)
E
-
Euro M12x1 pin connector (FAH13 only, on
request for FAHZ13)
H1-
DIN72585 Bayonet (FAH13 only)
X03
- Cable end with sheath length 0.5 m
X05
- Cable end with sheath length 2.0 m
X06
- Cable end with sheath length 3.0 m
X07
- Cable end with sheath length 5.0 m
X08
- Cable end with sheath length 7.5 m
X09
- Cable end with sheath length 10.0 m
Module
(for FAHD, FAHZ,
FAHS, FAHQ Se-
ries)
M10
- Module m1
M12
- Module m1.25
M15
- Module m1.5
Without code: Module m2
M25
- Module m2.5
M30
- Module m3
Shield
Without code: Shield attached to
the sensor housing
S0
Shield not attached to the sensor
housing
FA
_ _ _ _ _ _-
_ _ _ _
-
_ _-
_ _-
_ _
Example: FAHZ13-0323-X03-
M12-S0
