4 | Installation
NORIS Automation GmbH
26 / 44
Instruction manual FA13
A too close scanning distance may lead to signal distortion,
signal loss or may even damage the sensor and the scanning
object.
Thus, maintain the correct scanning distance.
F. Mount the sensor with nut and counter nut.
➩
Tighten the nuts with the correct torque (see next table).
Use appropriate tools and do not apply excessive force when
mounting the sensor.
The sensor may otherwise be damaged.
➨
The mounting is finished.
Thread
Material
Screw nut type
Torque
M18x1
Brass
30-35 Nm
20-25 Nm
Stainless steel
30-35 Nm
20-25 Nm
M18x1,5
Stainless steel
35-40 Nm
25-30 Nm
M16x1,5
Brass
- - -
20-25 Nm
M14x1
Brass
- - -
20-25 Nm
M14x1,5
Stainless steel - - -
30-35 Nm
5/8“-18UNF
Brass
- - -
25-30 Nm
NOTICE
NOTICE
