15/23
·
Refit the tap;
·
Pour a little water inside the pan;
·
Use the tap to drain out all water from the pan so as
to eliminate any small product residues inside the
dispensing channel.
7.6. Disassembling the tap
To clean the inside of the tap more thoroughly,
disassemble it as follows:
·
Remove the tap, follow the steps listed in paragraph
7.4;
·
Place the tap on a clean, flat surface, then loosen and
remove the screw(A) fastening the button to the
machine, then slide out the pin(B) and relevant
spring(C)from the seating.
·
Pull the (D) all the way out from the knob(E) then push
the lever(F) upwards from the bottom until it comes out
from the pin guide, as illustrated in the figure;
·
Unscrew the knob(E) by turning it anticlockwise while
holding the rod in place;
