12/23
empty the product from the bowl,
(see paragraph 7.2);
remove the bowl from the machine,
(see paragraph 7 3);
remove the tap from the machine,
(see paragraph 7.4);
clean the pan,
(see paragraph 7.5);
disassemble the tap previously removed from the
machine,
(see paragraph 7.6);
wash and sanitize the machine's component parts,
(see paragraph 7.7);
refit the bowl on the machine,
(see paragraph 7 8.1);
use a damp cloth and/or non-abrasive sponge soaked in
sanitizing product to clean the tap coupling;
re-assemble the tap,
(see paragraph 7.8.2);
fit the tap onto the machine,
(see paragraph 7.8 3);
perform the sanitizing procedure for the inside of the
machine,
(see paragraph 7.9);
clean the drip tray,
(see paragraph 7.10
clean the bowl using a damp cloth and/or a non-abrasive
sponge,
(see paragraph 7.11).
empty out the boiler tank,
(see paragraph 7.12);
clean and de-scale the boiler tank,
(see paragraph 7.13);
7.2. Emptying the bowl
Before cleaning out the bowl, it is first necessary to
empty out any production inside it.
With the machine switched on, empty out all of the
product still inside the bowl, using the level on the tap.
Fill the bowl with water and set thermostat to 50
℃
(122
°
F),Operate the appliance for at least 15-20 minutes;
increasing this amount of time will release any product
residues that may be stuck to the sides of the bowl.
Empty out the entire contents of the bowl, using the
lever on the tap.
Warning: the product dispensed from the machine has
a very high temperature; risk of scalding.
7.3. Removing the bowl
Warning: before removing the bowl, make sure that the
main switch is off and that the machine is unplugged
from the mains electricity and sufficiently cooled down
Removing the bowl is prohibited if it contains the
product or any other liquid
It Is fundamentally important to remove the howl and its
component parts if the machine .s to be correctly
cleaned and sainted.
To remove the bowl correctly proceed as follows:
·
Take off the lid;
