Norgren VS18 Скачать руководство пользователя страница 51

Страница: 51 / 97

VS18/VS26

MAINTENANCE & INSTRUCTION BOOKLET

8.1.5 FD67 bus assembly / Installation of PCB

Tool:

VS18/VS26

Philips screwdriver size 1

1. Important: Make sure valves are not already mounted on the valve island, because the

output PCB (B) could become damaged during assembly.

2. Insert the output PCB (B) in the left groove of the left end plate and the modular sub-bases.

Check to make sure the plug-in connection on the PCB is centred with the orifice to the
valve interface.

3. Look through the LED hole for mounting the FD67 E-connector-kit (A). Plug the connector of

the Fieldbus PCB which is mounted on the E-connector-kit (A) into the connector on the
output PCB (B).

4. Ensure connector-kit gasket is fitted on the left end plate.

5. Mount the FD67 E-connector-kit (A) with two mounting screws on the left end plate. Tighten

the screws then with the specified torque. If you are using a power screwdriver consider the
maximum speed allowed.

6. Ensure gasket on the bottom of the LED window (C) is fitted and place the LED window on

the left end plate. Turn mounting screws by hand in the existing threads and tighten then by
hand.

Screw

Type
(thread)

Valve
seize

Tightening
torque in Nm

Tightening
torque in Ibs

Max. screw driver
speed in r.p.m.

13 M3x8

VS18/
VS26

0.8 – 0.9

7.08 – 7.96

1100

17 M3x8

VS18/
VS26

0.4

3.54

Tighten by hand!

VS2672926-KG00E_05/07 Page

51/97

Содержание VS18


































































































Результаты поиска

Содержание VS18

Отзывы:

Norgren VS18, Инструкция по техническому обслуживанию, Страница: 51 / 97

Результаты поиска

Содержание VS18

Отзывы: