manualshive.com logo in svg

Norgren VS18, Инструкция по техническому обслуживанию, Страница: 29 / 97

Поделиться
Скачать
Norgren VS18 Скачать руководство пользователя страница 29

VS18/VS26

 MAINTENANCE & INSTRUCTION BOOKLET 

5.1.12 Replacement of pilot valves 

Tool: 

VS18/VS26: 

Socket screw key X10 

 
1.  Loosen existing pilot valve screws (two per 

pilot valve) by turning counter-clockwise. 

2. Important: Check and keep in mind the 

position of the gasket (A) between valve 
body and pilot valve (internal or external pilot 
air supply) to make sure placing the new 
gasket is set for the appropriate pilot type. 

3.  Remove pilot valve, V-ring (B) and gasket 

(A). 

4.  Place new V-ring (B) and new gasket (A). 

Consider now the position of the gasket (A) 
(internal or external pilot air supply). 

Screw 

Type 
(thread) 

Valve 
seize 

Tightening 
torque in Nm 

Tightening 
torque in Ibs 

22 M3x24 

VS18/ 
VS26 

0.9 – 1.0 

7.96 – 8.85 

5.  Place new pilot valve. Important: Turn new 

thread moulded pilot valve screws (two per 
pilot valve) by hand in the existing threads for 
safe seizing to avoid damaging the existing 
thread. Tighten the screws then with the 
specified torque. Do not use a power 
screwdriver! 

 
 
 
 

Note: 

To avoid failures and/or use of valves with not allowed specification, you have to make sure that 
the voltage of the new pilot valve complies to the old one. 
When changing valves or accessories (valve function, sandwich plate, etc.) on a valve island, 
the part number on the label will no longer correspond to the configuration. If you order the 
valve island based on the Norgren part number, the original configuration will be delivered. 
 
The pilot valve set includes: 

• 

1 pilot valve 

• 

1 gasket 

• 

1 V-ring 

• 

2 pilot valve screws 

For ordering information on pilot valves refer to section 

5.2.2

. 

VS2672926-KG00E_05/07 Page 

29/97 

 

Содержание VS18


































































































Отзывы:

Нет отзывов