Nordson PatternCoat Series, Руководство пользователя

Страница: 25 / 32

12
Applicators PatternCoat
21
P/N 7135308_08 E
2014 Nordson Corporation
PatternCoat
5. Remove the four screws (7) from the clamping block and release the
piston rod clamp (8).
6. Release sunk screws (9).
7. Separate the mouthpiece and mouthpiece receptacle from one another. If
necessary, insert forcing screws M5 (thread length >30 mm) (10).
Assembling Nozzle
1. Reassemble and install the nozzle in the reverse order. Observe the
following:
S
Use high temperature grease. Refer to page 23 , Processing
Materials .
S
Position of sealing rings (12) between nozzle and body.
Lubricating Adjusting Device
Use high temperature grease. Refer to page 23 , Processing Materials .