12
Applicators PatternCoat
P/N 7135308_08
E
2014 Nordson Corporation
PatternCoat
Electrical Connection
WARNING:
Risk of electrical shock. Failure to observe may result in
personal injury, death, or equipment damage.
Laying Cable
WARNING:
Ensure that cables do not touch rotating and/or hot unit
components. Do not pinch cables and check regularly for damage. Replace
damaged cables immediately!
Connecting Applicator
Heating
1. Connect cordset to the heated hose receptacle.
2. Use safety clips (when available) to secure the plug connection.
Solenoid Valves
The solenoid valves for the control modules are usually triggered by a control
unit (e.g.
Eclipse
). Refer to separate control unit manual.
WARNING:
Observe operating voltage:
PCTnnn x‐
B
‐...
24 V
DC,
overexcitation not permitted
CAUTION:
The solenoid valves, model
PCTnnn x‐
B
‐...
, may be connected
only to PLCs or control units that supply a stabilized 24 V
DC
signal
without
overexcitation. Higher voltage causes damage to the solenoid valve. Also,
an additional solid state relay with a shunted protective diode must be
used between the control unit and solenoid valve to cover the increased
power consumption! Refer to page
,
Accessories.
PCTnnn x‐
S
‐...
24 V
DC,
overexcitation permitted up to 48 V
DC
