Nordson Encore LT Automatic, Руководство пользователя по изделию

Страница: 24 / 71

System Setup
3-4
Part 1604858-01
E 2013 Nordson Corporation
Dual Controller Optional Wall Mounting Kit
(contd)
3
4
1
2
5
2
6
5
6
Figure 3-3 Dual Controller Mounting with Optional Wall-Mount Bracket
1. Stacking brackets
2. M5 x 12 screws 3. 12-in. Ground wire
4. 4-in Ground wire 5. Wall-mount bracket
6. Swivel bolt
Multi-Gun Controller Mounting
NOTE: If the multi-gun controller is equipped with Axis Controllers, it must
be located outside the spray zone. Locating it inside the spray zone (3 feet
or 1 meter on all sides of the booth) will void all agency approvals.
Position the multi-gun controller at the entrance or exit end of the booth,
with access to both power and compressed air. Anchor the enclosure to the
floor. Provide trays or covers to prevent damage to the gun and pump air
tubing and gun cables. Refer to Figure 3-4 for dimensions.