Operation
4-3
Part 7135457- E
E
2017 Nordson Corporation
10. Blow off the outside of the guns (may be manual or automatic depending
on your system).
11. After the pulsing has finished, manually clean the back of the gun
nozzle.
12. Clean the walls and roof of the booth with the
blow lance
taking care not
to scratch any surface and do not touch the booth walls.
13. Clean the booth base using the
blow lance
taking care not to scratch.
Figure 4-4
Manual booth
14. Open the duct door and clean, also clean inside the duct and the inlet to
the
cyclone
.
15. If required, when most of the powder has been blown away wipe the
inside of the booth with a damp cloth, ensure the cloth is damp only.
Figure 4-5
Open duct door
