Installation
3-1
Part 7135457- E
E
2017 Nordson Corporation
Section 3
Installation
WARNING:
Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Transport
Transport the unit so as to avoid damage. Use suitable packaging materials.
Protect the unit from humidity, large temperature fluctuations
(condensation), dust and vibrations.
Unpacking
Unpack the unit carefully to avoid damage. Inspect for any damage caused
during transport. Save packing materials for possible later use, or otherwise
dispose of properly according to local regulations.
Storage
Use suitable packaging materials. Protect the unit from humidity, large
temperature fluctuations (condensation), dust and vibrations.
Preparing for Installation
NOTE:
Booths are generally delivered flat pack for on- site assembly.
NOTE:
Installation of the booth should not be undertaken without the
presence of a Nordson representative or a suitably qualified person.
1. Choose a level site on which to install the ColorMax Booth, away from
drafts or any other airborne contaminates.
2. Seal concrete floors with a suitable material to avoid dust. Other floor
surfaces should be of a type that is easy to keep clean.
