23
• Open the drainage valve using the manual drainage switch (black round
button) located on the electronic print; the cylinder then empties itself
completely.
Let the cylinder cool down.
• Before proceeding further, disconnect the unit from the mains.
• Loosen the clamp on the steam hose, pull off the hose and remove
the electrical plug from the cylinder; the cylinder itself can now be
removed.
• To fit the new unit, reverse the above procedure. It is advisable to
wet slightly either the O-ring seal on the drainer or the outside of the
cylinder’s drainage aperture, since this makes it easier to fit the new
cylinder.
The humidifier is re-started in accordance with the recommendations
detailed in the chapter entitled “Putting the humidifier into operation”.
All NORDMANN steam cylinders are fitted with a removable drainage
strainer which can be extracted easily for cleaning.
The cylinder can then be put back into place and the humidifier put back
into operation.
Fig. 35
black
red
white
black
red
white
!
5.2 Drainage strainer in the steam cylinder
Procedure for replacing the steam cylinder
