Nordmann AT4 13064 Скачать руководство пользователя страница 55

Страница: 55 / 68

Remote operating and fault indication H1 (Option “RFI”)

The optional remote operating and fault indication PCB is to be connected

via a flat ribbon cable to the corresponding connector on the control board.

The optional remote operating and fault indication PCB contains four

potentialfree relay contacts for the connection of the following operating

and fault indications:
– “Error”:

This relay is activated if an error is present.

– “Service”: This relay is activated when the set service interval has

expired.

– “Steam”: This relay closes as soon as the unit produces steam.
– “Unit On”: This relay closes as soon as the unit is switched on via the

main switch.

The

maximum contact loading

250V/8A

Appropriate suppressor modules are to be used for the switching of relays

and miniature contactors.

Control signal (Y)

–

External continuous humidity controller or humidity sensor (A1)

An external continuous humidity controller or a humidity sensor (operation

with internal P/PI controller) is to be connected to the contacts “IN” (+)

and “GND” (–) of the terminal block “XE4” in the control compartment.

Note: the control signal must be set via the control software of the hu

midifier. The admissible control signals are stated in the technical data.

–

Ohmic humidity controller (passive)

An ohmic humidity controller (140Ω...10kΩ) is to be connected to the

contacts “V+”, “IN” and “GND” of the terminal block “XE4” in the control

compartment.

Note: for the ohmic humidity controller a jumper must be set on “JP35V”.

–

24 VDC On/Off humidistat (passive)

An 24 VDC On/Off humidistat is to be connected to the contacts “V+”

and “IN” of the terminal block “XE4” in the control compartment.

Note: for the 24 VDC On/Off control a jumper must be set on “JP324V”.

Air supply limit signal (signal Z)

–

External air supply limiter (A4)

An external air supply limiter (P/PI humidity controller) is to be connected

to the contacts “IN” (+) and “GND” (–) of the terminal plug “X11” on the

power board.

Note: the air supply limiter must be activated and configured via the

control software of the humidifier. The admissible limit signals are stated

in the technical data.

Connection of the fan units FAN4 N...

See separate documentation of the corresponding fan unit.

Содержание AT4 13064





































































Результаты поиска

Содержание AT4 13064

Отзывы:

Похожие инструкции для AT4 13064

Бренды по названию

Популярные бренды

Nordmann AT4 13064, Инструкция по монтажу

Результаты поиска

Содержание AT4 13064

Отзывы:

Похожие инструкции для AT4 13064

Бренды по названию

Популярные бренды