14]
Safety instructions/disposal:
●
Note the voltage supply!
The device may only be connected to the following alternating current mains:
a) 230 V/50 Hz (EU version) or
b) 110 V/50-60 Hz (US version)
●
Only batteries marked NiCd (nickel cadmium), NiMh (nickel metal hydride), and Li or Li-
Ion (lithium ions are charged with the adapters provided for this. Other battery types
permitted only if authorised by the manufacturer.
● In commercial institutions, the accident prevention regulations of the Association of
Commercial Trade Associations for electrical systems (BGV-A3) must be observed.
● Adapters are subject to wear. The BCS-5400/5401 (m)+ itself is maintenance-free.
Nevertheless,
if faults occur that require an alteration in the device required, then this
may only be completed by trained technical personnel.
● Defective safeguards on the device may only be replaced with equivalent designs.
● The BCS-5400/5401 (m) + may only be operated in dry rooms.
● Ensure sufficient ventilation! The ventilation slits on the respective device may never be
covered during operation to prevent possible heat accumulation. In spite of the innovative,
sophisticated cooling concept, the worst case could result in damage to individual
electronic components!
● In case of transport from a cold into a warm environment, wait until the BCS-5400/5401
(m)+ has reached room temperature before switching it on.
● Damaged batteries and charging systems are able to be recycled or must be disposed of
correctly as special waste. Provide these to your dealer accordingly. Your dealer is
obligated to accept them free of charge.
