13]
After removing the battery, the type of error is indicated to the user by an acoustic
signal. The error codes indicated below describe the errors that occurred:
(please also see:
“Technical service information for software version XX”)
The exact importance of the notice/warning message and the error codes are included
with the respective testing documents for the device and correspond with the newest
version. If you receive a software update, then ask for an updated version of the
documents in case of doubt.
Security system:
The device is equipped with a regular security query.
After the supply voltage switches on, the charging device electronics are checked for
any possible errors by a self-test. If the detected parameters do not match the saved
ones, this is indicated to the user by a message.
These system checks take place as described above and during battery charging. If
errors occur in this case that could endanger the battery, then the message indicated
above will be displayed and the affected charging slot will be switched off.
