6
STEP 1
1.
Attach the front sta-
bilizer (81) to the main frame
(10) using two flat washer (96)
and allen bolt (95).
2.
Attach the rear stabiliz-
er (91) to the main frame (10)
using two flat washer (96) and
allen bolt (95)
After assembly, the Trainer can
be adjusted to slightly uneven
ground by adjusting the height
of the foot caps at the front
and back. The pre-assembled
transportation wheels in the
front allow easy moving of the
Elliptical and therefore during
assembly.
STEP 2
1. Assemble the left pedal (99-L) to the
left crank (30) and the right pedal (99-R)
to right crank (31).
2. Assemble the seat (100) to the Seat
slider (78).
3. Then choose the desired position and
tighten the knob (17). Be sure the knob
is always tightened.
Remarks: When you have chosen a
desired position, tighten the Seat Post
Knob until you hear a “click”.
95
96
90
81
95
96
99-R
99-L
78
100
