10
9
75
75
75
74
74
58
59
9. Slide the Front Shield Cover (7) upward onto the
Upright (4).
While another person holds the Upright (4) near
the Frame (1), connect the Upper Wire (59) to
the Lower Wire (58).
Insert the Upright (4) into the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (4) with four M8 x 20mm Screws (74)
and four M8 Split Washers (75).
Slide the Front Shield Cover (7) downward to the
Frame (1) and press it into place.
4
7
1
Avoid pinching
the wires
10
10. Identify the Right Pedal (21).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (21)
clockwise
into the Right Crank
Arm (19).
Tighten the Left Pedal (not shown)
counter-
clockwise
into the Left Crank Arm (not shown).
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the
straps onto the tabs on the Right Pedal.
Adjust the strap on the Left Pedal (not
shown) in the same way.
19
Strap
Tab
21