28
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.
1. Hold the end of the treadmill near the location indicated by
the arrow at the right.
To decrease the possibility of in-
jury, bend your legs and keep your back straight as
you raise the frame.
Raise the frame about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob
to the left and hold it. Raise the frame until the catch is
aligned with the latch pin. Slowly release the latch knob.
Make sure that the latch pin is fully inserted into the
catch.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 30° Celsius (85°
Fahrenheit).
HOW TO MOVE THE TREADMILL
1. Before moving the treadmill, convert the treadmill to the
storage position as described above.
2. Hold the treadmill and place one foot against one of the
wheels.
3. Tilt the treadmill back until it rolls on the wheels. Carefully
move the treadmill to the desired location.
To reduce the
risk of injury, use extreme caution while moving the
treadmill. Do not attempt to move the treadmill over
an uneven surface.
4. Place one foot against one of the wheels, and carefully
lower the treadmill until the base is in the storage position.
Base
Wheel
Closed
Latch
Knob
Latch
Pin
Catch
