26
HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect an antenna, a 75 ohm CATV cable, or
a VCR to the 75 ohm antenna terminal on the tread-
mill, or plug a DVD Player or VCR into the
audio/video RCA jacks on the back of the console.
See page 11 for instructions.
Follow the steps below to operate the television.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
Press the Power button to select a television
source.
When the key is inserted, the television will auto-
matically turn on. If you have plugged a DVD
player or VCR into the audio/video RCA jacks on
the back of the console, or if you have plugged a
CD player or MP3 player into the IN jack on the
side of the console, select the Input source by
pressing the Power button once or twice.
Press the Channel buttons to select the
desired channel.
To select a channel, press the Channel buttons.
The selected channel number will appear on the
screen for a few seconds. Note: The television is
equipped with a channel memorizing function that
allows you to go directly from the current channel
to the next channel saved in memory. Before
channels can be selected in this way, they must
be saved in the television’s memory. See HOW
TO USE THE TV SETTINGS MODE on this page.
Press the Volume buttons to adjust the volume.
When either Volume button is pressed, the vol-
ume level indicator will appear on the screen for a
few seconds. Note: When the iFIT mode is se-
lected, the Volume buttons will control the volume
of the audio of the iFIT program.
To use earphones or headphones (not included),
plug them into the headphone jack on the console.
HOW TO USE THE TV SETTINGS MODE
The console features a TV settings mode that allows
you to adjust the settings of the television and to save
channels into the television’s memory.
Follow the steps below to use the TV settings mode.
Select the TV settings mode.
To select the TV settings mode, first select the set-
tings mode by holding down the Stop button while
inserting the key into the console. (The TV settings
mode will be selected when you press the Power
button in step 2.)
Press the Power button to adjust display set-
tings.
A few seconds after the Power button is pressed,
the brightness level indicator will appear on the tele-
vision screen. Press the Volume buttons repeatedly
to adjust the brightness setting if desired.
Next, press the Channel buttons repeatedly until the
contrast, color, sharpness, or hue level indicator ap-
pears. Adjust each setting, if desired, by pressing
the Volume buttons.
Press the Power button to add or delete
channels.
To add or delete a channel, first press the
Channel buttons until the desired channel number
appears on the screen. Then, press the Volume
increase button to add the channel, or the Volume
decrease button to delete the channel. Continue
this process until you have added all desired
channels and deleted all unwanted channels.
Press the Power button again and select a
video broadcast system for a single channel.
To select a video broadcast system for a single
channel, first press the Channel buttons until the
desired channel number appears on the screen.
Then, press the Volume buttons until the desired
video broadcast system for the channel appears
on the screen.
4
3
2
1
4
3
2
1
