NordicTrack Elite 10.9i Скачать руководство пользователя страница 32

Страница: 32 / 40

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback,

the reed switch should be adjusted. To adjust the

reed switch, first press the power switch to the off

position and unplug the power cord.

Next, use

a standard

screwdriver to

pry off the left

Disc (71).

Note: For

clarity, the left

shield and the

left disc ring

are not shown

in the drawing

below.

Locate the Reed Switch (38). Turn the Pulley (19) until

a Magnet (43) is aligned with the Reed Switch.

Next, slightly loosen the indicated M4 x 16mm Screw

(101), slide the Reed Switch (38) slightly closer to or

away from the Magnet (43), and then retighten the

Screw. Then, plug in the power cord, press the power

switch to the reset position, and rock the Pulley (19)

forward and backward just enough that the Magnet

passes the Reed Switch repeatedly.

Repeat these actions until the console displays correct

feedback. When the reed switch is correctly adjusted,

press the power switch to the off position, unplug the

power cord, and reattach the left disc. Then, plug in the

power cord.

101

Содержание Elite 10.9i









































Результаты поиска

Содержание Elite 10.9i

Отзывы:

Похожие инструкции для Elite 10.9i

Бренды по названию

Популярные бренды

NordicTrack Elite 10.9i, Руководство пользователя

Результаты поиска

Содержание Elite 10.9i

Отзывы:

Похожие инструкции для Elite 10.9i

Бренды по названию

Популярные бренды