background image

29

8.   Exit the settings main menu.

   If you are in a settings menu, touch the back 

button. Then, touch the close button (x symbol) to 

exit the settings main menu. 

HOW TO CONNECT TO A WIRELESS NETWORK

To use iFit workouts and to use several other features 

of the console, the console must be connected to a 

wireless network.

1.   Select the main menu.

   First, turn on the power (see HOW TO TURN ON 

THE POWER on page 21). Note: It may take a 

few moments for the console to be ready for use.

   Next, select the main menu. When you turn on the 

console, the main menu will appear on the screen 

after the console boots up. If you are in a workout, 

touch the screen, touch Pause, touch End, and 

then touch Finish to return to the main menu.

2.   Select the wireless network menu.

   Touch the Wi-Fi button (wireless symbol) at the 

bottom of the screen to select the wireless network 

menu.

3.   Enable Wi-Fi.

   Make sure that Wi-Fi

®

 is enabled. If it is not 

enabled, touch the Wi-Fi toggle to enable it.

4.   Set up and manage a wireless network 

connection.

   When Wi-Fi is enabled, the screen will show a 

list of available networks. Note: It may take a few 

moments for the list of wireless networks to appear.

   Note: You must have your own wireless network 

and an 802.11b/g/n router with SSID broadcast 

enabled (hidden networks are not supported). 

   When a list of networks appears, touch the desired 

network. Note: You will need to know your network 

name (SSID). If your network has a password, you 

will also need to know the password.

   Follow the prompts on the screen to enter your 

password and connect to the selected wireless 

network. (To use the keyboard, see HOW TO USE 

THE TOUCH SCREEN on page 21.)

   When the console is connected to your wireless 

network, a checkmark will appear next to the 

wireless network name.

   If you are having problems connecting to an 

encrypted network, make sure that your password 

is correct. Note: Passwords are case-sensitive.

   Note: The console supports unsecured and 

secured (WEP, WPA™, and WPA2™) encryption. 

A broadband connection is recommended; perfor-

mance depends on connection speed. 

   Note: If you have questions after following 

these instructions, go to support.iFit.com for 

assistance.

5.   Exit the wireless network menu.

   To exit the wireless network menu, touch the back 

button (arrow symbol).

HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console 

sound system while you exercise, plug a 3.5 mm male 

to 3.5 mm male audio cable (not included) into the 

jack on the console and into a jack on your personal 

audio player; make sure that the audio cable is fully 

plugged in. Note: To purchase an audio cable, see 

your local electronics store. 

Next, press the play but-

ton on your personal audio 

player. Adjust the volume 

level using the volume 

increase and decrease 

buttons on the console or the volume control on your 

personal audio player.

Содержание Elite 10.9i









































Отзывы: