background image

11

HOW TO EXERCISE ON THE ELLIPTICAL

To mount the elliptical exerciser, hold the upper body arms 

and step onto the pedal that is in the lowest position. Then, 

step onto the other pedal. Push the pedals until they begin 

to move with a continuous motion. 

Note: The pedal discs can turn in either direction. It is rec-

ommended that you move the pedal discs in the direction 

shown by the arrow;however, for variety, you may turn the 

pedal discs in the opposite direction.

The upper body arms are designed to add upper-body 

exercise to your workouts. As you exercise, push and pull 

the upper body arms to work your arms, shoulders, and 

back. To focus on lower-body exercise, hold the upper 

body arms but do not push or pull them as you exercise.

To dismount the elliptical exerciser, wait until the pedals 

come to a complete stop. 

Note: The elliptical exerciser does not have a free wheel; 

the pedals will continue to move until the flywheel stops. 

When the pedals are stationary, step off the highest pedal 

first. Then, step off the lower pedal.

WHEN YOU ARE FINISHED EXERCISING

If the pedals do not move for several minutes and the but-

tons are not pressed, the console will turn 

off and the 

display will be reset.

HOW TO USE THE TABLET HOLDER

IMPORTANT:  The  tab-

let holder is designed 

for use with most full-

size tablets. Do not 

place  any  other  elec-

tronic device or object 

in the tablet holder.

To insert a tablet into the 

tablet holder, set the bottom edge of the tablet in the tray. 

Then, pull the clip over the top  edge of the tablet. Make 

sure that the tablet is firmly secured in the tablet holder. 

Rotate the tablet holder to the desired angle. Reverse 

these actions to remove the tablet from the tablet holder.

IMPORTANT: If the elliptical has been exposed to cold 

temperatures, allow it to warm to room temperature 

before you plug in the power adapter. If you do not do 

this, you may damage the console displays or other 

electronic components.

Plug the power adapter 

into the receptacle on 

the frame of the elliptical. 

Insert the appropriate plug 

adapter into the power 

adapter if necessary. 

Then, plug the power 

adapter into an appropri-

ate outlet that is properly 

installed in accordance 

with all local codes and 

ordinances.

`

HOW TO USE THE ELLIPTICAL

Содержание E480





















Отзывы: